NVIDIA Jetson TX2

  • Add to Compare

NVIDIA JETSON TX2 Developer Kit

Jetson TX2 is an AI supercomputer on a module, powered by NVIDIA Pascal™ architecture. Best of all, it packs this performance into a small, power-efficient form factor that’s ideal for intelligent edge devices like robots, drones, smart cameras, and portable medical devices. It supports all the features of the Jetson TX1 module while enabling bigger, more complex deep neural networks.

 

Get real-time Artificial Intelligence (AI) performance where you need it most with the high-performance, low-power NVIDIA Jetson TX2. Processing of complex data can now be done on-board edge devices. This means you can count on fast, accurate inference in everything from robots and drones to enterprise collaboration devices and intelligent cameras. Bringing AI to the edge unlocks huge potential for devices in network-constrained environments.

This advanced developer kit exposes the hardware capabilities and interfaces of the developer board, comes with design guides and other documentation, and is pre-flashed with a Linux development environment. It also supports NVIDIA Jetpack—a complete SDK that includes the BSP, libraries for deep learning, computer vision, GPU computing, multimedia processing, and much more. The SDK includes an OS image that you’ll load into your device, developer tools, supporting documentation, and code samples to help you get up and running fast with Jetson.

Key Features

  • NVIDIA Pascal™ Architecture GPU
  • Dual-Core Denver 2 64-bit CPU + Quad-Core ARM® A57 Complex
  • 8 GB L128 bit DDR4 Memory
  • 32 GB eMMC 5.1 Flash Storage
  • Connectivity to 802.11ac WLAN and Bluetooth-Enabled Devices
  • 10/100/1000BASE-T Ethernet
 

Kit Contents

  • NVIDIA Jetson TX2 Developer Board
  • AC Adapter
  • Power Cord
  • USB Micro-B to USB A Cable
  • USB Micro-B to Female USB A Cable
  • Rubber Feet (4)
  • Quick Start Guide
  • Safety Booklet
  • Antennas to Connect to Wi-Fi-Enabled Devices (2)

The following items are recommended, but not included:

  • HDMI Display and Cable (Type A)
  • Keyboard and Mouse
  • JTAG Debugger
  • TTL to RS232 UART

Kit Contents

  • NVIDIA Jetson TX2 Developer Board
  • AC Adapter
  • Power Cord
  • USB Micro-B to USB A Cable
  • USB Micro-B to Female USB A Cable
  • Rubber Feet (4)
  • Quick Start Guide
  • Safety Booklet
  • Antennas to Connect to Wi-Fi-Enabled Devices (2)

The following items are recommended, but not included:

  • HDMI Display and Cable (Type A)
  • Keyboard and Mouse
  • JTAG Debugger
  • TTL to RS232 UART

Jetson TX2 Module

  • NVIDIA Pascal™ Architecture GPU
  • Dual-Core Denver 2 64-bit CPU + Quad-Core ARM® A57 Complex
  • 8 GB L128 bit DDR4 Memory
  • 32 GB eMMC 5.1 Flash Storage
  • Connectivity to 802.11ac WLAN and Bluetooth-Enabled Devices
  • 10/100/1000BASE-T Ethernet

I/O

  • USB 3.0 Type A
  • USB 2.0 Micro AB (supports recovery and host mode)
  • HDMI
  • M.2 Key E
  • PCI-E x4
  • Gigabit Ethernet
  • Full-Size SD
  • SATA Data and Power
  • GPIOs, I2C, I2S, SPI, CAN*
  • TTL UART with Flow Control
  • Display Expansion Header
  • Camera Expansion Header

Buttons

  • Power On/Off
  • Reset
  • Force Recovery
  • User-Defined

Power Options

  • External 19 V AC Adapter

Jetson TX Series Module Comparison

 

Jetson TX2

Jetson TX1

GPU

NVIDIA Pascal™,256 CUDA cores

NVIDIA Maxwell™,256 CUDA cores

CPU

HMP Dual Denver 2/2 MB L2 +

Quad ARM® A57/2 MB L2

Quad ARM® A57/2 MB L2

Video

4K x 2K 60 Hz Encode (HEVC)

4K x 2K 30 Hz Encode (HEVC)

4K x 2K 60 Hz Decode (12-Bit Support)

4K x 2K 60 Hz Decode (10-Bit Support)

Memory

8 GB 128 bit LPDDR4

4 GB 64 bit LPDDR4

59.7 GB/s

25.6 GB/s

Display

2x DSI,2x DP 1.2 / HDMI 2.0 / eDP 1.4

2x DSI,1x eDP 1.4 / DP 1.2 / HDMI

CSI

Up to 6 Cameras (2 Lane)

Up to 6 Cameras (2 Lane)

CSI2 D-PHY 1.2 (2.5 Gbps/Lane)

CSI2 D-PHY 1.1 (1.5 Gbps/Lane)

PCIE

Gen 2 | 1x4 + 1x1 OR 2x1 + 1x2

Gen 2 | 1x4 + 1x1

Data Storage

32 GB eMMC、SDIO、SATA

16 GB eMMC、SDIO、SATA

Other

CAN、UART、SPI、I2C、I2S、GPIO

UART、SPI、I2C、I2S、GPIO

USB

USB 3.0 + USB 2.0

Connectivity

1 Gigabit Ethernet, 802.11ac WLAN, Bluetooth

Mechanical

50 mm x 87 mm (400-Pin Compatible Board-to-Board Connector)

Developer Kits Key Features

Jetson TX2 and Jetson TX1 Developer Kits

USB 3.0 Type A

Full-Size SD

USB 2.0 Micro AB (Supports Recovery and Host Mode)

SATA Data and Power

HDMI

GPIO、I2C、I2S、SPI*

M.2 Key E

TTL UART with Flow Control

PCI-E x4

Display Expansion Header*

Gigabit Ethernet

Camera Expansion Header*

DEVELOPER TOOLS FOR EMBEDDED DEVELOPMENT

 

*I/O expansion headers: refer to product documentation for header specification


  • Revised web page of product spec and information won't be noticed, product colorbox printing shows the actual information of the product.
  • Above product spec is for reference only, actual spec rely on the real product and Leadtek keeps the right to alter. Each sales region will impacts the product difference, please contact your supplier for making sure the actual product information.
  • The adapter, cable and software listed on the web page are for reference only and Leadtek keeps the right to alter, revised information won't be noticed.
  • Above brand name and product name are trademark of each corresponding company.